Setting up a wireless router is not a hard task. And while router makers must be commended for making it much simpler to install their products, these suggestions will make the process simpler. I will also show you how to make sure your home network is as safe as it could be, and I’ll clarify some details that are networking that user guides frequently gloss over.
The majority of router manufacturers offer smartphone and tablet apps that you can use for tweaking and installation. In reality, some businesses bother using user interfaces in any way. I think that it’s ideal to have both options so that you can decide which strategy is better.
How to Setup a Wireless Router
Step 1: Set your wireless router
As any router manufacturer will tell you the finest place to locate your wireless router is in an open place in the center of your house. Because it is going to offer the most coverage, it’s great information. It’s also impossible for many people to do because you want to connect your router into the broadband gateway your Internet service provider has supplied you with. That equipment is always installed in a perimeter wall.
But there is also an easier choice: that the router that is mesh-style. Within this method, you locate one node wherever your gateway is and put succeeding nodes in various rooms of your residence. Your info will hop from one node to another, and you will have a solid signal that is Wi-Fi everywhere.
But, caution: Do not put a wireless node at a Wi-Fi lifeless spot–it will not have the ability to connect to your network any better than any customer device. Instead, set the node where its wireless signal can attain that dead spot.
Step 2: Configure your wireless router gateway
ISPs provide their customers with modems. If your gateway has an integrated router, then you’ll have to configure the gateway to either disable the router and then also pass on the WAN IP address (the unique Internet Protocol address that the ISP assigns for your account) and network traffic through to a new router.
Step 3: Connect your gateway into your new router
Turn your gateway off (unplug the power supply if there is no Freestyle change ). When an ethernet cable is plugged to the gateway’s LAN port, then disconnect it and then plug it in your router’s WAN interface (once more, some routers have dedicated WAN and LAN ports; others have auto-sensing interfaces ).
When there’s absolutely absolutely no ethernet cable an ethernet cable should come with your router. Use it in order to connect your router and the gateway. Turn back your gateway on and wait for a moment or two for it to boot up. Plugin the power source of your router and turn it. Wait another minute or two to get it to boot.
Recommended Read: How to Download Psiphon on Multiple Devices (Windows/Mac/Android/iOS)
Step 4: Change your router’s admin password
For configuring their own routers router makers provide smartphone programs. Use it if your new router has one (sometimes, that may be the sole way you’re able to configure the router). Connect your PC to the router with an ethernet cable, When there’s no app, or in the event, you’d prefer using the browser-based user interface of the router. Type the router’s IP address in your internet browser address window and hit the Enter key. The router IP address may be published on the router itself; it’ll look just like 192.168.1.1 or something similar.
You will require the router admin login and password to log in it. This information might be published on the router itself, but you may also find it in the manual. Input the credentials and hit Enter. You need to immediately change the default admin. Create something unique and write it down or enter it in a password manager software like LastPass. You may need it later to make updates and modifications. You’ll need to do a hardware reset In the event you forget the admin password, and any customizations you’ve made could be undone by that.
Step 5: Update the router firmware
Router manufacturers release new firmware after they have shipped the router. The firmware might contain critical bug fixes in addition to security and performance improvements, so make sure you’ve got the most recent version.
Step 6: Establish a password to your network
Some routers come from the factory with a pre-assigned Wi-Fi password (they may even put it on a tag on the router itself). Others will at least prompt you to create one when you set up the router. Make sure you configure the router to use at least WPA2 (second generation Wi-Fi Protected Access) encryption.
The considerably older WEP (Wired Equivalent Password) is absolutely insecure and should not be used. No recent classic router may use it by default but still hold it in the event you’ve got legacy devices that may only utilize WEP. You should retire them as they’re leaving your entire network vulnerable to the casual person if you are still using wireless devices that fall in this category.
Visit our official site for more tech guides and tutorials.
Step 7: Enjoy your own Wi-Fi system!
Then you should be able to log onto your new network working with the Wi-Fi password you made if everything went according to plan. Take full advantage of it, if your router has a guest network These generally allow your guests to access the internet while walling off them from the remainder of your network and your computers and storage devices connected to it.
Note: If you purchase something after clicking links in our posts, we might earn a small commission. Read our affiliate link coverage for more details.
Hope this guide would help you setup your routers be it in your home or office. That steps are easy anyways and you do not have to call a technician to do it for you. In case you need an assistance, do not hesitate to send us a ping and we’ll get back to you as soon as we can. Thanks for reading this post.